Fine, Dry & Off White cream colour Powder. It is based on best Quality of Starch specially treated and formulated by various additives. It Forms Solution when Mixed With Water.
Description
Off-white powder
Moisture Content
10% (% by weight, max.)
Ash Content
1% (% by weight, max.)
Viscosity
35 to 45 seconds (measure in B4 cup)
pH
Alkaline
Fantastick CORRUGATION gum is available in various grades as per solid to water ratio-
1:3
1:4
1:5
1:6
Our Best Selling Products
PRODUCT
Description
FCG HS
Specially developed for High speed automatic multi layer corrugated board manufacturing.
FCG FP
Specially developed for deep freezing packaging boxes.
FCG Neutral
It is moisture & water resistant Partially cold water soluble neutral Corrugation gum.
FCG High pH
Partially cold water soluble high ph Corrugation gum.
Advantages
Better penetration to form deeper fiber-tearing bonds with minimal stack cure time.
It increases Dry strength as measured by the PAT ( Pin adhesion test), ECT ( Edge Crush Test) and BCT (box crush test).
Dry in a required time which ultimately results faster running speeds - resulting in higher production output.
High mileage & low consumption improves Pin Adhesion
Superior bonding
Long Storage Life
Versatile - for use on both water-resistant and domestic board, and improves bonding on high-performance linerboard.
Our specialty lies in the fact that we can provide CORRUGATION GUM POWDER exactly according to the customer's requirement and preference.
Special attention is given for every delivery to maintain consistency in the quality.
